Platform bed with lights – Enjoy superior backrest while saving money by building a platform bed with light yourself. Take a simple wooden box and turn it into a platform bed in an afternoon. Moved light, convenient and inexpensive, avoids a homemade platform bed cost and problems presented by box springs. Say goodbye to a falling, creaky bed and hello for a good night’s sleep.
12 Photos Gallery of: Building Platform Bed with Lights
Decide on the features of the platform bed with lights you want to build. Determine the size of your platform bed. The width depends on whether you use a rim; add the width of the rim to the width of the mattress. Determine the finished height of the bed including mattress. Then subtract the thickness of the mattress from the total height; this measurement is the height of the platform. Remember to consider your bedside and footstool, if any, in your calculations.
Particleboard offers a good value, but is stiffer. Contact your purchased plan for the suggested materials. Cut your material, or cut your wallet or home products store. See your plan, or subtract the thickness of the upper surface material from the desired height of the platform; the measurement obtained is the height of two side supports from the floor. The length of the side support is equal to the measured value of the platform’s length bed. Sand the wood, if necessary, in the direction of the seed.
Stain or seal the wood before assembly. After the platform bed you build is assembled, you can walk over some raw wood with a cloth coated with bite or sealant. Install platform bed with lights where you want it to be positioned. You are basically building a box to support the mattress. Follow your sketch or instructions on your plan, if you have one. Attach the bedside and / or sideways, if any. Use 2 sets of L-brackets at each attachment to avoid shifts, which may damage the headboard and / or footstool, or follow the instructions on your purchased plan.